Axial Piston Pump A10 VSO Series 32

– Sizes: 71, 100, 140 (28, 45 and 180 in preparation) – Nominal pressure:280 bar
– Peak pressure:350 bar
– Regulating and control devices:

•  Two point control, directly operated
•  Pressure control

– with flow control: hydraulic
– with flow control: electronic
– with remote pressure control: hydraulic, or electric
– Power (torque) control

• with pressure control
• with remote pressure control
• with pressure and flow control
• with separate flow control

External Gear Pumps
– Displacements from 1 to 56 cm3
– Nominal pressures up to 280 bar
– Pressure-dependent gap sealing
– High precision of production
– Optimum level of efficiency
– High load capacity
– Application areas

• General machine construction
• Material handling
• Agricultural engineering
• Construction machinery

Internal gear pumps
– Displacement from 1.7 to 250 cm³
– Nominal pressures up to 315 bar
– Max. speeds up to 3,600 rpm
– Max. power up to 95 kW
– High degree of efficiency due to complete sealing gap compensation

Fixed Displacement Bent Axis Pump A2FO series
– Size 5, nominal pressure: 4,600/5,100 psi (315/350 bar)
– Sizes 10 to 200, nominal pressure 5,800/6,500 psi (400/450 bar)
– Sizes 250 to 1,000, nominal pressure: 5,100/5,800 psi (350/400 bar)
– This axial piston bent axis design pump is suitable for hydrostatic drives in opencircuits

Axial Piston Variable Pump A7VO Series

– Sizes 28…160 nominal pressure 350 bar
– Peak pressure 400 bar
– Open circuit
– Variable pump with axial tapered piston rotary group of bent axis design for hydrostatic drives in open circuit
– Use in mobile and industrial applications
– The output flow is proportional to the drive speed and pump displacement and is steplessly variable between maximum and zero (qv max to qv min = 0)
– Wide selection of regulating and control devices
– Rugged, compact bearing system with long service life

Directional spool valves, direct operated, with solenoid actuation Models WE Directional Control Valves

– Wet-pin AC or DC solenoids
– Solenoids with detachable coil
– For subplate mounting (“P”): Porting pattern to DIN 24340 form A and ISO4401 – Electrical connection as individual connection or central connection
– Optional inductive position monitoring (RE 24830)
– Smooth switching characteristics

Directional spool valves, direct operated, with manual actuation Models WMM, WMR, and WMU Directional Control Valves

– Sizes 4 to 22
– Porting pattern to DIN 24340 form A and ISO 4401
– Operation by means of

• lever (type WMM)
• roller (type WMR, WMU)

Double throttle check valves in sandwich plate design
Model Z2FS Flow Control Valves

– Sizes 6 to 22
– Porting pattern to DIN 24340 form A and ISO 4401
– For limiting the main or pilot flow of one or two actuators
– Meter-in or meter-out throttling

Pressure relief valves in sandwich plate design, pilot operated
Model ZDB and Z2DB Pressure Relief Valves

– Sizes 6 and 10
– Porting pattern to DIN 24340 form A and ISO 4401
– 4 pressure stages: 50, 100, 200, 315 bar
– 5 pressure relief functions: A – T,P – T,B – T,A –T and B – T, A – B and B – A

Pressure relief valves, direct operated
Model DBD Pressure Relief Valve

– Sizes 6 to 30
– For subplate mounting (“P”)
– For threaded connection (“G”)
– As cartridge valve (“K”)
– Type-tested safety valves in accordance with Pressure Equipment Directive 97/23/EC

Pilot operated check valves in sandwich plate design Model Z2S Check Control Valves

– Sizes 6 to 22
– Porting pattern to DIN 24340 form A and ISO4401
– For the leak-free isolation of one or two actuator ports – Various opening pressures

Hydraulics Application: Directional poppet valves, direct operated
Models SED and SEW Directional Control Valves

– Sizes 6 and 10
– Porting pattern to DIN 24340 form A and ISO 4401
– Leak-free isolation of closed port
– Solenoids with detachable coil
– Pressure-tight chamber needs not to be opened for changing the coil (type SED)
– Reliable switching when under pressure over longer periods of standstill